United Technologies TruVision SVR Guía de usuario descargar pdf (Pagina 38)

Device Discovery and Management

38 TruVision SVR System User Guide

• Rebooting device(s)

• Getting Firmware Version of device(s)

• Opening Web Page of a device

• Checking default credentials of device(s)

Device List

Provides a list of devices in the network. For convenience, devices can be grouped together by their

type or brand. The list can also be sorted by one of the columns by keeping the selected groupings.

‘Connected To’ column provides the information on the recorder each camera is recording to.An

empty field indicates that the camera is discovered in the network, but is not assigned to a recorder

yet.

Device list also provides the following device information: Model Name, IP Address and Port,

Subnet Mask, Firmware Version, MAC ID, and Serial Number.

In addition, the Status column provides the results of the Ping, Assigning IP Address, Get Firmware

Version, and Reboot commands.

Assign IP Address

Allows the users to assign an IP address to a camera.

1. Select a camera from the device discovery list.

2. Click [Change IP Address].

3. Enter the [New IP Address] to the related field, and click [Ok].

Ping

Allows the users to ping device(s) to check the link activity. Status of the ping command is given in

the Status field.

Reboot

Allows the user to remotely reboot device(s) with one click. Status of the reboot command is given in

the “Status” field.

Opening Webpage of a Device

Allows the user to open the web browser menu of a device.

Checking Default Credentials of a Device

Allows the user to check if device credentials are changed from the default values.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

United Technologies TruVision SVR Guía de usuario Pagina 38