United Technologies TruVision SVR Guía de usuario descargar pdf (Pagina 28)

TruVision SVR Capabilities

28 TruVision SVR System User Guide

Various settings can be applied to the camera including picture settings, camera settings, event

management, and audio input settings.

Camera status can be checked and updated with [Get Camera Status] button in this menu.

Motion Detection (AI)

TruVision SVR is able to detect moving objects or people within the camera’s field of view. Motion

detection can be customized to:

• Detect motion in only certain regions of the camera’s view.

• Configure the movement threshold that must be met in order to generate an alarm.

Note: Since the Motion Detection Grid of the SVR in the configuration window is a function

of the SVR itself, a grid set in the SVR configuration will not be reflected in the

camera’s own motion detection settings.

Configure Motion Detection

To setup motion detection in the Navigator interface, please follow these steps:

1. In the Services menu, click [Start] to begin the notification processor.

2. Right-click on the IP camera and select “Configure Camera.”

3. On the Video sub-tab, enable the Motion Detection check box.

4. Click [Grid button]. The Motion Grid Setup window opens.

5. Right-click on the image and select “Select All.” Or click and hold the left mouse to select the

specific area(s).

6. Select a schedule.

7. Select “Normal” for recording.

8. Select “On” for Alarm.

9. Select a sensitivity level between 0-100.

10. Click [OK] to save. Once these steps are completed, the bell icon should turn to red with motion

events.

Note: It may take a couple minutes for changes to take effect. Refresh the alarm list until the

first alarms are populated.

Camera Tampering

TruVision SVR is able to detect when the camera cannot view an area due to a tampering activity. An

alarm is generated if the camera cannot focus on the scenery within the camera’s field of view but

does detect a solid color image. This is used primarily to alert monitoring stations that a camera has

been compromised by being covered.

Brightness Change

TruVision SVR is able to detect lighting changes within the camera’s field of view. If the lighting

changes from bright to dark or vice-versa an alarm is generated.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Sin comentarios

United Technologies TruVision SVR Guía de usuario Pagina 28